home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
BBS Toolkit
/
BBS Toolkit.iso
/
doors_1
/
awall202.zip
/
ALLYWALL.DOC
next >
Wrap
Text File
|
1992-08-17
|
36KB
|
981 lines
Alley-Wall
Version 2.02
An Advanced Door For PCBoard 14.x Bulletin Board Systems
By,
David Pabst
18 McAdams Road
Framingham, MA 01701
Available through
CompuServe
EMail 76547,2643
Or
Relaynet Shareware Conference
copyright 1990-1992
all rights reserved
Use of Alley-Wall is
only allowed for a
limited 14 day trial
period for unregistered
versions.
Table Of Contents
Alley-Wall Features.................................... 1
Registration Support, Benefits......................... 2
License................................................ 3
Upgrading To Latest Version Of Alley-Wall.............. 6
Guide To The Documentation............................. 7
System Requirements ................................... 8
File List.............................................. 9
Using AWSETUP.......................................... 10
Requirements...................................... 10
Setup Functions................................... 11
Misc. Functions................................... 12
Quitting Functions................................ 12
Setup Menu........................................ 13
Setup Functions.............................. 13
Installation of Alley-Wall............................. 14
Getting Started................................... 14
Once It's Working................................. 15
Using Alley-Wall....................................... 16
Normal Commands................................... 17
Sysop Commands.................................... 18
Entering Data..................................... 19
Registering............................................ 21
Disclaimer............................................. 22
Registration Form...................................... 23
Appendix A - Problems and Treatment.................... 24
Further Help........................................... 26Alley-Wall Features
Alley-Wall is the most advanced, easiest to use, friendliest, and
most direct way to post public bulletins (graffiti) to the
bulletin board users. These are some of the advantages of using
Alley-Wall over the next "graffiti" wall competitor:
Ansi and ASCII Visual Support
Alley-Wall uses both ANSI and ASCII menus, bulletins, help
files, etc... Alley-Wall generates an ANSI bulletin for color
users and an ASCII bulletin for non-IBM computers or slow
modem users. Alley-Wall also stamps the time and date of when
the bulletins were reset (created). * Users now can set
colors in their bulletins to whatever appeals to them!!! *
Intelligent Programming That Keeps Sysop "House Cleaning" Easy
Alley-Wall can be set to allow a maximum number of entries on
the Alley-Wall at one time. For instance, if you set the
maximum number for 25, and the 26th is entered; Alley-Wall
will remove the oldest entry, thus making only 25 entries on
it.
New Entries Can Place Themselves In Two Ways
Alley-Wall allows the sysop to have new entries to be placed
at the beginning of the bulletins (On top), or to have new
entries appended on to the end (This was how all previous
versions of Alley-Wall worked)
Easy To Use Menus
Alley-Wall has friendly, colorful menus. These menus can be
interrupted by the user by typing ^K at any time. Just as
easy as it was interrupted they can be displayed again using
the ? key. There are two sets of menus which include ASCII
and ANSI versions: the Sysop menus, and the user menus.
An Advanced Setup Program
A new interface was designed solely for programs written by
me. I incorporated the new interface in the setup program
for Alley-Wall.
Ease Of Use
Just hit a key, and the Alley-Wall does its thing. No hard
commands to learn, no cryptic ancient languages, and a quick
familiarization time.
Flexibility
Any of the bulletins can be edited using a text editor or an
ANSI editor such as TheDraw.
SysOp Commands
System Operators have special commands just for them to use.
Such as Kill Alley-Wall Files, See Who Posted What, etc...
Special Lock Out System
For trouble makers! The SysOp can lock them out of the door
using a special utility that is included with Alley-Wall.
This lock out system can also shut down the door for
temporary purposes.
Support
When you register Alley-Wall, you get:
A) on-line support through Compuserve E-Mail,
B) a formatted, Near Letter Quality Printed copy of the latest
documentation (Deluxe Edition),
C) support through RelayNet ShareWare (unofficial support
base) message base (Route To Xevious; To: David Pabst),
D) bulletin board support (names and numbers are listed
further in the documentation),
E) A reduced upgrade price for all major upgrades (All future
versions will be totally registered for you by using your
registration code),
F) notification of all future releases,
G) A disk with the latest version of Alley-Wall, and
H) free bug fixes for all current versions of Alley-Wall.
License
CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS. IF YOU DO NOT
AGREE WITH THEM, YOU SHOULD PROMPTLY DELETE THE ENTIRE PROGRAM.
USING THIS SOFTWARE INDICATES YOUR ACCEPTANCE OF THE AGREEMENT.
Alley-Wall is not Public Domain or free. It is ShareWare.
ShareWare is a way of distributing software so the purchaser can
try the software before purchasing.
Non-Registered users of this software have 14 days to try Alley-
Wall before removing it from their system or registering. Using
Alley-Wall after the 14 days without registering it is illegal.
Alley-Wall can not be modified in any respect, for any reason,
including but not limited to, de-compiling, disassembling, or
reverse engineering of Alley-Wall. The registration screen and all
of the menus, help files, and start up files must never be altered,
removed, bypassed, or disabled by any means (the bug-a-boo
registration screens are disabled with the registered copy).
You are free to distribute the publicly available shareware version
of Alley-Wall to others subject to the above restrictions and also
the following:
A) No fee is charged for its use.
B) No re-numeration may be accepted for Alley-Wall. This does
not apply to bulletin board service, online services,
etc... membership, subscription, or access charges.
C) Alley-Wall must be distributed in un-altered form, complete
with licensing information, full documentation, and all
accompanying files and programs. The archive must not be
altered in any respect.
D) All Shareware vendors must make sure that the version is
the unregistered shareware version. Or request a free
evaluation disk. (Shareware houses ONLY)
Bulletin Board Systems (BBS) may make Alley-Wall available for
download only if the above conditions are met. The archive
(AWALL20.ZIP) distributed by me or an equivalent archive may be
made available only in complete form. Refer to the File Listing
for a complete listing of all the files, use this to verify a
complete packet. If the contents appear to be altered or not
complete, you may obtain the latest shareware release of Alley-
Wall for only $5.
Vendors must give a description that treats Alley-Wall fairly. It
must be an objective review. Vendors may not refer to this
software as cheap, gaudy, etc.. Included with Alley-Wall is
VENDORS.DOC which includes a few sample descriptions.License
The previous license statement does not apply to the registered
version of Alley-Wall. The registered software is protected under
United States Copyright. It must be treated just like a commercial
software with certain exceptions as follows:
A) I authorize the making of archival copies of the registered
version for the sole purpose of backing up your software
and protecting your investment from possible loss.
B) The medium on which the registered software is recorded is
transferred to the customer, but not the title of the
software.
C) The software cannot be transferred to anyone. It can
be only on one computer.
This license is effective until terminated. You may terminate it
at any time by destroying the software together with all copies,
manuals, disks, saved files, etc.. The license also terminates if
you fail to comply with the terms and conditions of the license
agreement.
Also, by terminating the license, you wave the right to reduced
upgrade fees, upgrade notices, etc.
Upgrading
Users who have registered Alley-Wall versions 1.0-1.61 may upgrade
for $5 (US). You must state your registration PASSNUMB when you
upgrade. Fill out the registration form later in the
documentation.
Guide to the Documentation
I added this part to help you get around the manual. I hope it
helps. I detest long, unhelpful manuals. So I hope this gives you
some idea of this manual.
Alley-Wall and its utility programs are very powerful and have many
commands. Here is a brief summary of the contents of the manual:
1) Installation
A) Using Alley-Wall's Setup Program
B) Getting Things to Work
2) Instructions for using Alley-Wall
A) User Commands
B) Sysop Commands
3) More Legal stuff
5) Appendices:
A) Problems, trouble Shooting, and treatment
6) Registration Form
The text has an abundance of footnotes (in the registered,
formatted manual). These are intended for particularly curious
and/or sophisticated users. First time users and those wishing to
avoid needless complexity should feel free to skip them. Some
footnotes may not be important, but some are rather important.
Alley-Wall Setup Requirements and AWALL20.ZIP File List
SYSTEM REQUIREMENTS
Alley-Wall will run on any IBM PC compatible that runs PCBoard
14.x. Alley-Wall uses and creates other files to perform its
function. This space may be 0 bytes to hundreds of kilobytes
of space. You need to be able run PCBoard compatible doors, if you
don't have PCBoard a door converter can run Alley-Wall.
FILE LIST
The following briefly lists files that are included and created by
Alley-Wall, Alley-Wall Setup, and Alley-Wall Bad User.
NOTE: Files such as ALLYWAL? means there are two files, such as
ALLYWAL and ALLYWALG; the one with the G being in ANSI, the one
without, in ASCII.
AWALL202.ZIP The archive that Alley-Wall v2.02 should be included
in.
ALLYWALL.EXE The Alley-Wall Executable.
ALLYWALL.CNF Configuration file for Alley-Wall.
AWSETUP.EXE The Alley-Wall Setup program, using a new and unique
interface.
AWBDUSER.EXE The Alley-Wall Bad User System. This file Resets,
adds, deletes, and lists users in the Bad User
File.
ALLYWALL.DOC The DOS text version of this documentation.
ALLYWALL.WPF Wordperfect version of ALLYWALL.DOC with formatted
text, footnotes, etc...
AWBDUSER.HLP Help file that accompanies AWBDUSER.EXE.
README.DOC Important info: Changes, bugs, etc...
UPGRADE.EXE The upgrade program to upgrade Alley-Wall 1.5x\1.6x
to 2.02.
FILE LIST (Continued from previous page)
AW.BAT A batch file for PCBoard to run Alley-Wall, the file
needs to be renamed to AW. This may be different
with other systems.
AWTEST.BAT A batch for testing Alley-Wall in Local mode.
LAYOUT.DOC The layout for the configuration file.
INVOICE.DOC Registration form; One is included in this file.
SHAREWRE.DOC A document describing Shareware.
VENDORS.DOC Description of Alley-Wall for vendors.
AWBDUSER.LST File created by Alley-Wall and used by AWBDUSER.
ALLYWAL? Alley-Wall bulletin. Created by Alley-Wall.
AWALSYSG Sysop bulletin, only viewable by sysop; Includes
names of who posted a bulletin, at what time, on
what day.
AWHELP? Help File that is used when the user requests help
in the door.
AWMENU? The [user] menus that are included with Alley-Wall.
AWSMEN? The [sysop] menus.
AWSTART? The Alley-Wall opening screens.
ORDER.DOC Order form which can be printed and used for
registering Alley-Wall.
HISTORY.DOC The History of Alley-Wall, information on changes
between versions.
AWBUM? Alley-Wall bad User Message. You can create this
file, and it will be displayed if a Bad User trys
to run Alley-Wall. If AWBUM or AWBUMG doesn't
exist, Alley-Wall will display the Bad User Message
in the configuration file.Using Alley-Wall Setup Program (AWSETUP)
AWALL20.ZIP comes with a program named AWSETUP.EXE. Use this
program to configure Alley-Wall.
REQUIREMENTS
AWSETUP requires around 50 kilobytes of memory to run. It requires
a color monitor. It should be installed in the same directory
that Alley-Wall is installed in.
Alley-Wall Setup uses (sorta) the Text Windowing Interface(TWI);
It's not fully ported to TWI, but most of it is. Alley-Wall Setup
also features edit prompts that keep you from going out of the
bounds, etc.
COMMANDS
Setup Functions
System Operator's Name S
Instructs the computer to prompt you for the System Operators Name.
It will display what is currently entered above the prompt if
anything, if nothing, you will just get the prompt. You are to
write the system operators (SysOp) name.
Bulletin Board's Name B
You will be prompted to enter the Bulletin Board's (BBS) Name. A
recommended answer would be:
Galaga Telecommunications Service
You can use basically whatever you would like as the name of your
BBS.
Registration Code R
This is the registration code. You will receive this when you
COMMANDS (Continued from previous page)
register Alley-Wall. If you are not registered type in any bunch
of numbers you want.
SysOp Security Level L
This is used for the Sysop commands so the program can tell who has
access to the SysOp functions. For example, if the SysOp's
security level is set at 255 then enter 255.
Use "Bad User" system U
This is the lock out system that is built into Alley-Wall. If you
want to use the Bad User System then type in Y, if you do not; type
in N.
Message for "Bad Users" M
This is the message the bad users get run they try to run the door.
You can enter any string you would like. A new feature in
Alley-Wall allows you to have files AWBUM?, meaning Alley-Wall Bad
User Message, you can create this file, if this file does not exist
Alley-Wall will display the string above.
Names w/ People With Access N
This allows you to enter up to three more names. These three
names will have sysop access when they use Alley-Wall.
Directions Bulletins Are Placed D
New Entries can be placed at the beginning of the Alley-Wall or at
the end. Basically, it can be NEW ON TOP, or NEW ON BOTTOM.
Maximum Number Of Bulletin Entries E
Alley-Wall will set a maximum number of entries for the Alley-Wall.
For instance, if you set it for 25 entries, and the 26th is
entered; Alley-Wall will remove the oldest entry, thus making the
total number of entries 25.
Misc. Functions
View Configuration File V
This is helpful because it gives you a run down of the
configuration. It displays, gives a description of each item, and
really makes setting up easier.
Help with Setup H or F1
This provides help functions within AWSETUP. Help isn't available
at the main menu, but is available at the Setup Menu.
Information on registering I
This is the registration screen, for Alley-Wall. I would like to
remind you Alley-Wall is not free or in the public domain. It is
a product, and has to be bought or you must stop using it.
Changes and Updates C
This procedure displays HISTORY.DOC in a multi-directional
scrolling text viewer. Press return or X when you are done
reading. HOME\END\UP\DOWN\PAGE UP\PAGE DOWN all work in the text
viewer.
Quitting Functions
Abort Without Saving A
This is the fast quit function. If you have entered data, and use
this option, IT WILL BE LOST. It is recommended that you exit with
^Q or Q.
Quit and Save ^Q or Q
This lets you exit the program safely. It will automatically save
any data you have edited or entered. You should usually exit this
way. It may take an extra 5 seconds on an XT, but on an AT you
won't be able to notice the difference between quitting and saving
or aborting without saving.
The Setup (For Alley-Wall Setup) (Ctrl-S)
You can get into the setup screen by pressing Ctrl and S at the
same time from the main menu. This will bring you to a setup
screen, which allows you to control the parameters of the Alley-
Wall Setup interface.
COMMANDS
Change Fill Character C
Use this option to change the background fill character. The first
time AWSETUP runs it sets the fillchar to ▒. You can set
characters using the ALT key and the numeric keypad. You must
press ALT, while holding ALT down, type in 177 on the keypad.
After this is completed you will have ▒. You can enter any
character you desire.
Help F1
The setup menu has its own help window. When you press F1 a window
will appear and describe how to enter a character for the
background. Just like above.
Quit ^Q
This is the same as Quit and Save. Refer to Quitting Functions on
the preceding page.
Main Menu ESC
Just press the escape key and you will be back at the main menu.
If you pressed the escape key by accident just type, ^S you will be
right back at the setup menu.
Installation
Installing Alley-Wall is probably the hardest part of using this
door. These instructions have been written on the premise that the
software being used is PCBoard. I know that other bulletin board
systems can use PCBoard doors by using door converters, or user
file converters. If you are using software other than PCBoard
please refer to its instructions.
Also you must have PCBoard (or the converters for) 14.x. That
means any version of PCBoard over version 14 works with Alley-
Wall.
Getting Started
First you must unzip the files to your bulletin board directory
or your door directory. Once this is done use AWSETUP.EXE to
configure the door if this is your first time using Alley-Wall.
If you have a previous version of Alley-Wall run UPGRADE.EXE first.
Once you have finished configuring Alley-Wall, use a text editor to
edit AWTEST.BAT. This is what AWTEST.BAT looks like:
@echo off
allywall allywall.cnf c:\pcb LOCAL
You must change the c:\pcb to the directory with the bulletin board
files. You must also type in LOCAL in capitals to run in LOCAL
mode.
If you are using other bulletin board software, you must read the
documentation that came with YOUR software to determine how to use
the software with PCBoard doors. But the previous paragraph must
also be done.
If it gives you the bad user message you must disable the function
Use Bad User File; You may do this by selecting U within
AWSETUP.EXE. Then type Control Q (^Q) or Q to quit and save.
Once It's Working
You should see a large menu that takes up most of the display. If
it only takes up half of the display you have done one of two
things wrong:
1) You entered the wrong Sysop Security Level,
2) you have to set the Sysop Security Level at 255 while
running in local mode from DOS without the BBS software,
3) Your name is not the sysop name in the config file,
4) Your name is not one of the names that can be entered in
addition to the sysop. (Names of people who have access)
If you still have problems having it run, refer to Appendix A -
Problems and Treatment.
If you get a prompt stating that you have 15 seconds or press
return, this means you have not followed the directions correctly.
Once again you must type ALLYWALL ALLYWALL.CNF C:\PCB LOCAL (or
equivalent) to run it in local mode from the DOS prompt. If you
are running in local mode through your BBS software you only have
to type ALLYWALL ALLYWALL.CNF C:\PCB.
If you still have problems you can contact me through Compuserve,
or RelayNet (Shareware conference).
If you do get it working you should explore the options presented.
You have to learn how to use Alley-Wall before your users do, so
that you can help them if they have problems. Don't worry though,
there is on-line help built in to the system.
You can always edit the options you have set with AWSETUP.EXE,
always remember to exit with ^Q or Q if you have made changes.
Using Alley-Wall
These commands do not have to be memorized since there are online
menus for both ASCII and ANSI users, and online help that describes
the commands. The following is a list of all commands with a
description of each:
COMMANDS
Normal Commands
Write on the Alley-Wall W
This is the feature that allows you to write on the Wall. It is a
very easy to use entry prompt. You can enter up to 240 characters
on up to 3 lines. The author of a bulletin (in ANSI or ASCII mode)
can change the colors in the bulletins by typing @#. The @ is for
telling the computer a control code is coming, and the number for
what color to display. For instance, typing:
Hello@4 Everyone
...would appear as...
Hello [NOW THE TEXT IS RED] Everyone
Alley-Wall now strips blank lines from the entries. Then the user
is prompted if they would like their name posted. Finally, they
are prompted if they want this entry posted.
Read the Alley-Wall R
This allows you to read the bulletins that have been entered into
the Alley-Wall. The computer automatically selects which bulletin
should be viewed. Either ALLYWAL or ALLYWALG are selected from
viewing depending if the user's graphic flag is up or down.
Version Information V
This option displays all the information about the program to the
common user. It displays version, author, bbs software,
programming language, etc...
Registration Status E
This displays the current registration status. If your board is
registered then you will get a thank you message. On the other
hand, you will get a registration message. If you would like to
register refer to the registration form.
Graphics Mode Change I
This is an option so users can change their graphics flag while
they are in the door. They will not have to exit back to the
bulletin board software to switch in to\out of graphics or text
mode. You can switch back and fourth as much as you want. It is
also their for door converters which automatically set graphics to
off. The users can change into graphics mode if they want
graphics.
BETA Testers B
This was added to give thanks to all of the bulletin board systems
who BETA tested, and helped with the development of this software
package. Thanks to all that helped!!!
Help H
This is the help feature for Alley-Wall. This gives basic help for
the most important commands that are included within Alley-Wall.
If you or your users need more help refer to this documentation.
Quit back to BBS Q
This returns the user back to the bulletin board software. It
closes all open files, and does not log people off the system.
Goodbye, Hangup Modem G
This disconnects you from the bulletin board software. It closes
all files and drops carrier.
Sysop Commands
Kill Alley-Wall Files K
Use this to reset the Alley-Wall bulletin files. ALLYWAL,
ALLYWALG, and AWALSYSG are reset. Be careful when using this
command. After being reset, Alley-Wall stamps the time and date it
was reset, and the new entry placement method (New on top, or new
on bottom).
See Who Posted What S
This is a bulletin that only the sysop can view. It shows the name
of everyone who has posted a bulletin, the bulletin, and more.
This is helpful if you are looking for someone who has posted a
"negative" message, and if you want to lock them out of the door
with AWBDUSER.EXE.
Bad User List 1
This just displays everyone who is in the Bad User List. You can
edit the users with a text editor, or AWBDUSER.EXE.
Display Door Configuration 2
This shows the configuration of Alley--Wall in two ways. The first
is to display the data with a short description. The second is
right below the first, and it displays the raw ALLYWALL.CNF. This
procedure is also included in AWSETUP.EXE.
ENTERING DATA
When you select W in Alley-Wall a text entry prompt is displayed.
In graphics mode it is three lines of solid color, in ASCII it is
one line of =>. Every time you press return in ASCII mode it adds
another =>.
Above the entry prompt there is a block of numbers. These numbers
tell you the length of the prompt, and where you are right now..
All you have to do is enter a bulletin. You do not have to fill
the whole prompt. You can hit return at any point. Pressing
Escape will clear any data you have entered already in the line,
and is good if you made a mistake.
CHANGING COLORS in the entry is easy. All you have to do is type
@ and a number, like @1. For instance, if you typed: Hello@4
Everyone it would come out as: Hello (text now red) everyone. A
list of all the available colors appears when you prepare to enter
a new entry.
After you are done entering text Alley-Wall asks you if you would
like your name displayed with the post. You can enter with a yes
or a no; meaning Y or N (Y,N).
Finally, you are asked if you want the bulletin posted; Alley-Wall
displays a preview for you so you can decide. You can enter with
a yes or a no; meaning Y or N (Y,N).
Registering
You are required to register Alley-Wall after a 14 day evaluation
period. If you do not register within 14 days, you must stop using
this software.
I have included a description of what shareware is about. I have
done this to describe the importance of registering.
Shareware distribution gives users a chance to try software before
buying it. If you try a shareware program and continue using it,
you are expected to register. Individual programs differ on
details. Some request registration while others require it, some
specify a maximum trial period. Registration often entitles the
user to updates, printed documentation, or other effects.
Copyright laws apply to both shareware and commercial software, and
the copyright holder may retain all rights. The only meaningful
difference between shareware and commercial software is the method
of distribution. Shareware authors specifically grant the rights
to copy and distribute the WHOLE software package, with specific
exceptions.
If you should find that this software meets your needs, you have a
responsibility to purchase this software.
Shareware makes finding software for your needs easier, because you
can try before you buy. Also the cost for distribution is much
lower, so the price of the product can be much lower that it would
if it was commercial. Finally, shareware has the ultimate money-
back guarantee. If you don't like it, don't buy it.
All registrations must be paid with money orders or checks that are
in American funds.
Mail registrations to David Pabst, 18 McAdams Road, Framingham, MA
01701, USA.
To register use the form on page 21.
Disclaimer
Anyone using Alley-Wall must accept this disclaimer of warranty:
Alley-Wall is supplied as is. The author disclaim all warranties
expressed or implied, including without limitation, the warranties
of fitness for any purpose. The author assumes no liability for
the use of Alley-Wall even when the author has been informed of the
possibility of such damage.
For the remainder of this agreement, the term Alley-Wall refers to
the Alley-Wall program with all of its accompanying files. Alley-
Wall is shareware and is licensed at no charge to the user for
14 days. Feel free to distribute this software, but not to alter
the software.
Registration Form
Mail to:
David Pabst
18 McAdams Road
Framingham, MA 01701, USA
NAME:_______________________________________________
ADDRESS:____________________________________________
CITY:_______________________________ STATE:________
ZIP CODE:___________________________________________
PHONE(Opt.):________________________________________
Please write any comments about Alley-Wall below.
MEMO:_______________________________________________
____________________________________________________
All orders must be in United States funds. Please send checks or
money orders only.
Description Quantity Price
Alley-Wall Evaluation Copy _______ $5
(Unregistered Shareware Version)
Alley-Wall Normal Registration _______ $13
(latest version, registration code,
Upgrade notification)
Alley-Wall Deluxe Registration _______ $20
(printed manual, binder, latest
version, registration code, etc)
Alley-Wall Upgrade to v2.02 _______ $8
(You must state your reg. code.
Also, if I do not have a record CODE:___________
of you I will not accept your
upgrade.)
Version you have:__________ Total price: $_______
Do you have a high density disk drive? _________
Disk Size Wanted: [_]5.25" [_]3.5"
Appendix A - Problems
There are many things that can go wrong with doors and bulletin
board systems. I think that they can be one of the hardest forms
of computer software to install. Some problems are:
1) You get this prompt:
USAGE: PROGRAM CONFIG_FILE SYSTEM_DIR [LOCAL]
EXAMPLE: prokit prokit.cnf c:\pcb2 LOCAL
08-09-91 16:10 Prokit 3.1 of 10-08-89
Error: Invalid command parameters
(15 second delay) Press (Enter):
-OR-
08-09-91 16:20 ALLEY-WALL 2.02 3.1 of 10-08-89
Runtime error: 104 PC=0000:1EF8
(15 second delay) Press (Enter):
A) You must type allywall allywall.cnf c:\pcb LOCAL to run the
door in local mode without the bulletin board software.
Allywall is the executable file, allywall.cnf is the
configuration file, c:\pcb is the directory where the
bulletin board software is located, and LOCAL means to run
the door locally. LOCAL must be is capital letters.
B) If that does not work, it may be that the configuration file
does not exist, corrupted, or it's not in the same directory
that Alley-Wall is in. Use AWSETUP.EXE to modify or create
the configuration file.
C) Run time errors are certain errors at run time that cause the
program to display an error message and terminate:
Runtime error: nnn XXXX:YYYY
where nnn is the runtime error number, XXXX:YYYY is the
runtime error address(segment and offset).
These can occur if there is an unknown bug in Alley-Wall, or
there is a vital file missing or damaged.
The runtime errors are divided into four categories: DOS
errors 1 through 99; I\O errors, 100 through 149; critical
errors, 150 through 199; and fatal errors, 200 through 255.
(This preceding paragraph was copied from the Turbo Pascal
manual.)
2) Just doesn't run.
A) You haven't renamed AW.BAT to AW.
B) You haven't changed the directories, file locations, etc...
in AW.BAT.
C) Archive wasn't complete or it was damaged. You can call
anyone of the support boards or you may order a 5 dollar
evaluation copy.
3) The door crashes for no reason.
A) This can happen from a number of reason. The foremost being
that you have terminate and stay resident programs(TSR)
active. You can try to remedy this by disabling the TSRs.
B) A user abruptly hung up when using a command or procedure
that doesn't often check the carrier status (This is being
remedied).
4) It runs, but you're locked out.
A) Try disabling the Alley-Wall Bad User system in AWSETUP.EXE
(Command U).
5) Sysop Menu does not come up for sysop.
A) Enter 255 for sysop security level, or the specific level
that you, the sysop are.
B) Enter your name in the Sysop Name prompt.
C) If running in Local mode, make one of the (AWSETUP.EXE
command N)"names of people w\access" a blank line.
Further Help
If you have any questions, problems, comments not addressed by the
manual, feel free to make use of the Alley-Wall on-line support.
Please post questions and comments to ID 76457,2643 by sending
Compuserve E-MAIL. You can also send messages to David Pabst
through RelayNet (RIME) in the Shareware conference. Finally, you
can call the )(evious Telecommunications Service at (508)875-3618,
and post a message to David Pabst in the EMAIL (Type: J 1, then E)
conference. You may also download the latest version from
)(evious (type: D AWALL20.ZIP), or in the Compuserve IBMBBS forum,
door section.
Here is a list of the bulletin board systems, and services that
will have the latest version of Alley-Wall.
Board Name Town\State\Country Phone
---------- ------------------ -----
)(evious Framingham, MA, USA (508)875-3618
Channel 1 Cambridge, MA, USA (617)354-2505
Compuserve AnyWhere, AnyWhere (YOUR-LOCAL-#)
All of these bulletin boards have a copy of Alley-Wall available
for online use (except Compuserve). All of these bulletin boards
also have the latest version of Alley-Wall available for download.
If you would like your board to become a support board, just drop
me a line.